Compressed air installations - laser cutter service

Compressed air powers the laser cutter's pneumatics, protects the optics and is increasingly used for cutting. It has to be dry, clean and delivered at the right pressure. We install and upgrade these systems.

Report a breakdown Call our service team+48 669 222 682

Air cutting
Drying and filtration
Leak test

Request a call from our service team

Describe the machine and the symptoms. We agree the scope before work starts.

We work with cutting heads and control systems from

Service for laser cutters
CNC machine service
Industrial automation
Compressor service
Printing for industry

Instalacje sprężonego powietrza - szczegół

Dry, clean airdrying and filtration matched to the machine

The situation

Water and oil in the air quickly end up on the head optics

Moisture and oil from poorly dried air settle on protective windows and lenses. Pressure drops, in turn, cause uneven cutting and pneumatic alarms.

When you contact us, give the type of compressor and dryer, the length of the installation and the pressure required by the laser cutter. If you cut with air, tell us which material thicknesses go on the table most often.

Report a breakdown

Service scope

What we do, typical situations and what you get

What we do

Compressed air installations for laser cutters and production halls
Selection of dryers and filters
Supply for compressed air cutting
Leak detection and repair
Extension and upgrade of an existing network

When to contact us

Dirty protective windows and head optics
Water or oil in the lines and drain traps
Pressure drops when several machines are running
Planned compressed air cutting

What you get

An installation with pressure and flow matched to your machines
Drying and filtration that meet the manufacturer's requirements
Leak test report
Recommendations on filters and condensate drainage
One contact throughout the job

What you get

Air that does not harm the machine

Longer optics life

Dry, clean air reduces deposits on the protective windows and head lenses.

Stable pressure

We size pipe diameters and receivers so that pressure does not drop at peak demand.

Lower energy costs

Fixing leaks means shorter compressor run times and lower electricity bills.

How we work together

How the work is carried out

Sending the details
You describe the compressor, the dryer and the machines supplied by the installation.
On-site measurements
We check the pressure, air quality and leak-tightness of the installation.
Agreeing the scope
We present the scope of work and materials before work starts.
Installation and testing
We install the system and carry out a leak test.
Commissioning at the machine
We check the laser cutter running on the new supply and hand over our recommendations.

Knowledge base